Electrician in Maker Alley, Petaluma, CA
Troubleshooting, Panels, Lighting and Backup Power
Family-owned, licensed electrician (CSLB #1156335) with twenty-plus years in the trade, serving the Maker Alley area of Petaluma. You get a written scope and a firm price before we start.
What to know before you call:
- Straight answers and a clear price up front, with no up-sell.
- A family-owned crew that does the work and stands behind it.
★★★★★
5.0 · 27 Google reviews
20+ years
in the trade
CSLB #1156335
licensed · bonded · insured
Sonoma County
owned & operated
Electrician in Maker Alley, Petaluma, CA
Bright Right Electric in the Maker Alley area of Petaluma
- Licensed California C-10 contractor, CSLB #1156335
- Family-owned, with 20+ years in the trade
- Written scope and firm price before any job starts
- Permits pulled, inspections and utility coordination handled
Electrical services
Electrical Work in the Maker Alley area of Petaluma
If you need an electrician in the Maker Alley area of Petaluma, you get a written scope and a firm price before we start, in plain language, from the licensed contractor who will actually do the work. Bright Right Electric is a family-owned crew. When you call, you reach the people who do the work and who are accountable for how it turns out, not an answering service. If something is genuinely unsafe, we say so directly, and if it can wait, we tell you that too.
Panels, Circuits and Electrical Capacity in the Maker Alley area of Petaluma
Most electrical projects begin with the panel and the circuits behind it, so that is where we start.
When the main service itself is the limit, the answer is a service upgrade, and it starts with a load calculation and an assessment of what your property has. Bundling the upgrade with other panel work in one visit saves on permitting costs and cuts down how many times your power gets disconnected.
EV Charger Installation in the Maker Alley area of Petaluma
Once the panel is sorted out, charging at home comes down to a few clear decisions.
The important first step for charging at home is finding out whether your electrical service has enough capacity. We run a load calculation to see whether your panel can support a Level 2 charger or whether a service upgrade is needed, and the installation includes the dedicated circuit and appropriate sizing. We size the charger to your specific vehicle, not just the maximum available, and we give you real numbers on charging speed and cost instead of marketing language.
Universal EV charger installation gives multi-brand households practical options that don't have to be the most expensive one. We confirm which vehicles you own or expect to own and whether an adapter is needed for full compatibility, size the dedicated circuit to the charger's amperage, install and test the charger through a full charging cycle, and finish with a final inspection that confirms the work is safe and code-compliant.
Generators, Solar and Backup Power in the Maker Alley area of Petaluma
Backup power is a planning question before it is an equipment question.
Portable generators produce a real carbon monoxide risk, so a safe connection matters. We install a power inlet box connected to your panel through an interlock kit or a transfer switch, confirm inlet placement and any required permits, verify that your home has working carbon monoxide alarms, test the complete connection, and review placement and safety rules with you before we leave.
Commercial and Tenant Electrical Work in the Maker Alley area of Petaluma
Businesses and landlords need electrical work scheduled around how the space is used.
Commercial lighting work also includes repair, motion sensor lighting, flood lights, landscape lighting and pendant lighting for offices, retail spaces and restaurants. Larger projects share permitting and installation costs across more fixtures, and we work around your business hours to keep disruptions to a minimum.
Getting Started in the Maker Alley area of Petaluma
Getting started is simple. Every Bright Right estimate comes with a defined scope and a real price before any work begins, in writing and explained in plain language. Call (707) 791-5552 and describe the job, the question or what you want a second opinion on, and we will tell you what to expect before we arrive.
Troubleshooting and repair
Tripping breakers, flickering lights, dead outlets or circuits, GFCIs that won't reset and unusual burning odors: we diagnose the problem at its source and fix it properly, without unnecessary part replacements or guesswork.
Rewiring and remodels
Every circuit is permitted and inspected, and remodel work is inspected at both the rough-in and finish stages.
Panel and service upgrades
Older panels may not have the capacity to support today's appliances, EV chargers and heat pumps. We upgrade outdated or undersized panels and electrical services so your home or business has the capacity, safety and reliability it needs.
Areas
More Petaluma Areas We Serve
Start with our main page for the city, or pick another area nearby.
Map and directions
Maker Alley on the Map
The map shows the area. Use the button to open it in Google Maps, or get directions from our shop.
Open in Google MapsMap data from OpenStreetMap contributors
From our shop
Our shop is at 1150 Holly Ave in Rohnert Park. Open directions from our shop in Google Maps for a current route.
Call for a free estimate
Call (707) 791-5552 and describe the job, the question or what you want a second opinion on.
What we need from you
Tell us what is going on, when it happens and how often, so we know what to expect before we arrive.
Everything we do
All Electrical Services in the Maker Alley area of Petaluma
Everything below is available in the Maker Alley area of Petaluma, for homes and for businesses.
Commercial electrical: commercial versions of the services above, including tenant improvements, lighting and code corrections.
Electrician in Maker Alley, Petaluma, CA
Popular in the Maker Alley area of Petaluma
“We needed a fan in our living room and after calling 2 other companies, we chose Bright Right and will continue to use them. Professional and very knowledgeable.”
Eric Cabrera, from our Google reviews
Questions
Frequently Asked Questions
Do you handle emergencies?
We offer priority scheduling for emergencies. Our hours are 7am to 5pm, and 24 hour emergency services are available.
Why are my lights flickering?
Flickering can have different causes depending on when and where it occurs. We troubleshoot the circuit and identify the actual source instead of guessing at the repair.
Do I need the largest generator available?
Not necessarily. It depends on your home's existing electrical load. Some homes are better served by a critical-loads panel that keeps essentials such as the refrigerator, a well pump and the internet running. We recommend the system that fits the property rather than automatically selling the largest generator.
What backup power equipment do you install?
We install standby generators, critical-load panels, portable-generator inlets, automatic transfer switches and whole-house surge protection, and we also handle solar and battery storage.
Do you pre-wire for future equipment?
Yes. For new construction and remodels, we tell you what to pre-wire now, such as an EV charger, solar or a generator, while the walls are open, since retrofitting later costs far more.
Get in touch
Ready to Get Started?
Call (707) 791-5552 any time, day or night, or fill out the quote form below and we'll get back to you.
Phone
(707) 791-5552
(tap to call)
Address
1150 Holly Ave, Rohnert Park, CA 94928
Hours
7am - 5pm & 24 hour emergency services available.
15 ─────── Full service detail
Electrical Panel Upgrades in Rohnert Park
Replacing an undersized or obsolete panel is the most common job we perform in Rohnert Park, and it's the one that unlocks everything else. If your home still runs original 100-amp service, a Federal Pacific Stab-Lok, or a Zinsco panel, you're working with equipment engineered for a much smaller electrical load — and, in the case of those two brands, with a documented history of breakers that fail to trip. Upgrading to 200-amp service makes EV charging, battery backup, heat pumps, and modern appliance loads possible without constantly tripping breakers. We size the new service to what your household actually needs, pull the permit, coordinate the PG&E disconnect and reconnect, and meet the inspector for final sign-off.
EV Charger Installation in Sonoma County
Bright Right installs Level 2 home charging sized to your vehicle and, just as importantly, to your panel's actual available capacity. We run the dedicated 240-volt circuit, mount and commission the charger, and handle the permit — installing Tesla Wall Connectors, universal J1772 and NACS units, and hardwired or plug-in setups across Rohnert Park, Petaluma, and Santa Rosa. The detail most homeowners don't hear until it's too late is that many Sonoma County panels can't support a Level 2 charger without a service upgrade first, so we run a load calculation before you buy equipment, not after. We can also pre-wire a second circuit if a second EV is anywhere in your future.
Standby Generators & Backup Power
Public safety power shutoffs are a fact of life in Sonoma County, and so are winter storms that take lines down in the hills. We install whole-house standby generators with automatic transfer switches that pick up the house within seconds of an outage, wire inlets and manual transfer switches for portable generators, and add whole-house surge protection so your equipment isn't damaged when the utility comes back online. We'll also tell you honestly which tier makes sense — not every home in Cotati or Penngrove needs a whole-house unit when a critical-loads panel that keeps the refrigerator, well pump, internet, and a few circuits alive costs a fraction as much.
Solar & Battery Systems
We handle new photovoltaic installation, battery storage, system additions, and remove-and-replace work when a roof needs attention or a system has failed — plus service on existing arrays that aren't producing what they should. If you inherited a solar system with the house and nobody can tell you how it's wired or whether it's still under warranty, we can assess it and give you a clear picture. Battery storage in particular has changed the math for Sonoma County homeowners: between shifting utility rate structures under NEM 3.0 and the frequency of outages, a battery paired with existing solar is often a better investment than adding more panels.
Interior & Exterior Lighting
Recessed and can lighting, full LED retrofits, under-cabinet lighting, dimmer and smart-switch installation, fixture and chandelier hanging, landscape lighting, and security and motion-sensor lighting for homes across Rohnert Park and the University District. On the commercial side we handle lighting retrofits for offices, retail spaces, and warehouses along the Commerce Boulevard corridor, including the fixture and control changes that come with California Title 24 compliance. Lighting is one of the few electrical upgrades where the difference is immediately visible, and it's frequently the cheapest way to make a dated room feel finished.
Electrical Troubleshooting & Repair
Breakers that trip for no obvious reason, circuits that go dead, lights that flicker when the dryer starts, outlets that no longer hold a plug, GFCIs that won't reset, a faint burning smell you can't locate. These are the calls where experience shows. We trace a fault to its real source instead of swapping parts and billing for guesses, which is why our repairs hold and why we get called in behind other contractors who couldn't find the problem. In older Sonoma County homes the cause is often a failing backstab connection, a corroded neutral, a rodent-damaged run in a crawlspace, or a decades-old junction box buried behind drywall.
Custom Homes & New Construction
Full electrical for ground-up residential builds, major remodels, and additions throughout Sonoma, Marin, and Napa County — load calculations and plan review, service and meter setup, rough-in, trim, and final inspection. We work with general contractors, designers, and owner-builders, and we're comfortable on high-end custom projects near Sonoma State University where the lighting design, low-voltage layout, and smart controls all have to be coordinated before a single wire goes in. Getting the details right at rough-in is what keeps a home safe and functional for the next forty years — and it's far cheaper than fixing it after the drywall is up.
Commercial Electrical & Tenant Improvement
Service upgrades, panel and subpanel work, dedicated circuits for equipment, lighting retrofits, EV charging for employee and customer parking, and full tenant-improvement electrical for offices, retail, restaurants, and light industrial space along Redwood Drive and beyond. We understand a commercial job runs on someone else's schedule, so we work around business hours when the scope requires it. From a single dedicated circuit to a complete build-out, you get one licensed contractor coordinating permits, PG&E, and inspection — with clear pricing and a clean, code-compliant result.