Electrician Near Petaluma Adobe State Historic Park, Petaluma, CA
EV Chargers, Solar Batteries, Panels and Lighting
Looking for an electrician near Petaluma Adobe State Historic Park? Bright Right Electric is a family-owned, licensed contractor (CSLB #1156335) with twenty-plus years of experience and a firm price in writing before work begins.
What to know before you call:
- Independent electrician: not affiliated with or endorsed by Petaluma Adobe State Historic Park.
- A written scope and a firm price before we start.
★★★★★
5.0 · 27 Google reviews
20+ years
in the trade
CSLB #1156335
licensed · bonded · insured
Sonoma County
owned & operated
Electrician Near Petaluma Adobe State Historic Park, Petaluma, CA
Bright Right Electric near Petaluma Adobe State Historic Park
- Licensed California C-10 contractor, CSLB #1156335
- Family-owned, with 20+ years in the trade
- Written scope and firm price before any job starts
- Permits pulled, inspections and utility coordination handled
Electrical services
Electrical Work near Petaluma Adobe State Historic Park
Panel, EV charger, generator, solar, battery and lighting work all come under a single license, so there is no finger-pointing between trades and one permit process instead of three. That is why homeowners and businesses in the area around Petaluma Adobe State Historic Park in Petaluma call us for everything from a dead outlet to wiring a custom home from the ground up. Whether you are upgrading an older home, adding modern equipment or chasing a problem that won't go away, we have the experience to handle the job properly.
This page is for homes and businesses near Petaluma Adobe State Historic Park. Bright Right Electric is an independent electrician and is not affiliated with, sponsored by or endorsed by Petaluma Adobe State Historic Park.
Panels, Circuits and Electrical Capacity near Petaluma Adobe State Historic Park
Most electrical projects begin with the panel and the circuits behind it, so that is where we start.
A panel replacement starts with identifying what you actually have: the panel's brand and its condition, before anything is quoted. From there the steps are straightforward. We file the required permit, schedule a short, coordinated disconnect at the meter, replace the panel, and test it before and after the swap so you can see the difference. You finish with paperwork suitable for insurance or a home sale. Replacement is commonly done at the same amperage, and sometimes it is paired with an increase in capacity.
Outlet type is the most confusing part of adding a 240-volt outlet for most homeowners, especially anyone shopping for an EV charger. We ask what is actually being plugged in, whether an EV charger, range, dryer, hot tub or shop equipment, since that determines the outlet type and amperage. We confirm your panel has room for the new circuit before quoting, so a needed service upgrade isn't a surprise later, and we put the scope and price in writing before work begins.
EV Charger Installation near Petaluma Adobe State Historic Park
Charging an electric vehicle at home is an electrical project first and a charger purchase second.
Choosing a connector is part of the job. For Tesla owners we help you pick between the standard and the Universal Wall Connector, and if you have or might get a non-Tesla EV, the Universal Wall Connector avoids needing a separate charger down the road. We size the dedicated circuit to the charger's output, commission the charger, connect it to Wi-Fi so it can be managed through the Tesla app, and test it through a full charging cycle.
Generators, Solar and Backup Power near Petaluma Adobe State Historic Park
When the power goes out, the right backup plan depends on what you need to keep running and for how long.
Standby generators, critical-loads panels, portable-generator inlets, automatic transfer switches and whole-house surge protection are all part of what we install. We explain system type, sizing and cost before you sign anything. For some homes the right answer is a standby system, and for others it is a critical-loads panel that keeps the essentials running, such as the refrigerator, a well pump, internet and selected circuits.
Commercial and Tenant Electrical Work near Petaluma Adobe State Historic Park
For commercial properties, the work is planned around operating hours and building requirements.
Commercial electrical work covers service upgrades, subpanels, dedicated circuits for equipment, lighting retrofits, EV charging installations and rewiring of outdated or undersized wiring in a business, retail space, restaurant, warehouse or multi-tenant building. We plan around your operating hours, scheduling disruptive portions during off-hours or weekends where needed, and work section by section so most of your space stays operational.
Getting Started near Petaluma Adobe State Historic Park
Getting started is simple. Every Bright Right estimate comes with a defined scope and a real price before any work begins, in writing and explained in plain language. Call (707) 791-5552 and describe the job, the question or what you want a second opinion on, and we will tell you what to expect before we arrive.
New construction wiring
We tell you what to pre-wire now for an EV charger, solar or a generator, since retrofitting later costs far more.
Panel and service upgrades
Older panels may not have the capacity to support today's appliances, EV chargers and heat pumps. We upgrade outdated or undersized panels and electrical services so your home or business has the capacity, safety and reliability it needs.
Lighting installation
Indoor, outdoor, recessed, LED and energy-efficient lighting, expertly installed, from chandeliers and under-cabinet task lighting to landscape lighting and smart lighting controls.
Areas
More Petaluma Areas We Serve
Start with our main page for the city, or pick another area nearby.
Map and directions
Petaluma Adobe State Historic Park on the Map
The map shows the area. Use the button to open it in Google Maps, or get directions from our shop.
Open in Google MapsMap data from OpenStreetMap contributors
From our shop
Our shop is at 1150 Holly Ave in Rohnert Park. Open directions from our shop in Google Maps for a current route.
Call for a free estimate
Call (707) 791-5552 and describe the job, the question or what you want a second opinion on.
What we need from you
Tell us what is going on, when it happens and how often, so we know what to expect before we arrive.
Everything we do
All Electrical Services near Petaluma Adobe State Historic Park
Everything below is available near Petaluma Adobe State Historic Park, for homes and for businesses.
Commercial electrical: commercial versions of the services above, including tenant improvements, lighting and code corrections.
Electrician Near Petaluma Adobe State Historic Park, Petaluma, CA
Popular near Petaluma Adobe State Historic Park
- Electrical safety inspections
- Panel replacement
- Electrical code corrections
- Standby generator installation
“Bright Right did an amazing job for me with my solar and battery system. I cannot recommend them enough. Super professional, competitive pricing, kind and friendly service.”
Steve Monahan, from our Google reviews
Questions
Frequently Asked Questions
Do you do commercial electrical work?
Yes. We handle electrical upgrades for businesses, including service upgrades, subpanels, dedicated equipment circuits, lighting retrofits and EV charging installations for offices, retail spaces and restaurants, and we work around your business hours.
Do you handle solar and batteries?
Yes. We handle new photovoltaic installation, battery storage, system additions and remove-and-replace work, plus service on existing arrays and straightforward evaluations of inherited systems.
How do I get an estimate?
Every Bright Right estimate comes with a defined scope and a real price before any work begins, in writing and explained in plain language. For projects where the actual electrical conditions need to be assessed, we provide a site assessment and a written estimate rather than guessing at a number over the phone.
What is a subpanel?
A subpanel is a secondary electrical panel fed from your main panel, commonly added for a garage, workshop, ADU or home addition so that space gets its own dedicated circuits without maxing out the main. It is different from a full panel upgrade.
Do I need a permit for electrical work?
Panel work, new circuits and remodel wiring need a permit, and we file the required permit as standard before work begins. We coordinate the process so any power outage is targeted to hours rather than days.
Get in touch
Ready to Get Started?
Call (707) 791-5552 any time, day or night, or fill out the quote form below and we'll get back to you.
Phone
(707) 791-5552
(tap to call)
Address
1150 Holly Ave, Rohnert Park, CA 94928
Hours
7am - 5pm & 24 hour emergency services available.
15 ─────── Full service detail
Electrical Panel Upgrades in Rohnert Park
Replacing an undersized or obsolete panel is the most common job we perform in Rohnert Park, and it's the one that unlocks everything else. If your home still runs original 100-amp service, a Federal Pacific Stab-Lok, or a Zinsco panel, you're working with equipment engineered for a much smaller electrical load — and, in the case of those two brands, with a documented history of breakers that fail to trip. Upgrading to 200-amp service makes EV charging, battery backup, heat pumps, and modern appliance loads possible without constantly tripping breakers. We size the new service to what your household actually needs, pull the permit, coordinate the PG&E disconnect and reconnect, and meet the inspector for final sign-off.
EV Charger Installation in Sonoma County
Bright Right installs Level 2 home charging sized to your vehicle and, just as importantly, to your panel's actual available capacity. We run the dedicated 240-volt circuit, mount and commission the charger, and handle the permit — installing Tesla Wall Connectors, universal J1772 and NACS units, and hardwired or plug-in setups across Rohnert Park, Petaluma, and Santa Rosa. The detail most homeowners don't hear until it's too late is that many Sonoma County panels can't support a Level 2 charger without a service upgrade first, so we run a load calculation before you buy equipment, not after. We can also pre-wire a second circuit if a second EV is anywhere in your future.
Standby Generators & Backup Power
Public safety power shutoffs are a fact of life in Sonoma County, and so are winter storms that take lines down in the hills. We install whole-house standby generators with automatic transfer switches that pick up the house within seconds of an outage, wire inlets and manual transfer switches for portable generators, and add whole-house surge protection so your equipment isn't damaged when the utility comes back online. We'll also tell you honestly which tier makes sense — not every home in Cotati or Penngrove needs a whole-house unit when a critical-loads panel that keeps the refrigerator, well pump, internet, and a few circuits alive costs a fraction as much.
Solar & Battery Systems
We handle new photovoltaic installation, battery storage, system additions, and remove-and-replace work when a roof needs attention or a system has failed — plus service on existing arrays that aren't producing what they should. If you inherited a solar system with the house and nobody can tell you how it's wired or whether it's still under warranty, we can assess it and give you a clear picture. Battery storage in particular has changed the math for Sonoma County homeowners: between shifting utility rate structures under NEM 3.0 and the frequency of outages, a battery paired with existing solar is often a better investment than adding more panels.
Interior & Exterior Lighting
Recessed and can lighting, full LED retrofits, under-cabinet lighting, dimmer and smart-switch installation, fixture and chandelier hanging, landscape lighting, and security and motion-sensor lighting for homes across Rohnert Park and the University District. On the commercial side we handle lighting retrofits for offices, retail spaces, and warehouses along the Commerce Boulevard corridor, including the fixture and control changes that come with California Title 24 compliance. Lighting is one of the few electrical upgrades where the difference is immediately visible, and it's frequently the cheapest way to make a dated room feel finished.
Electrical Troubleshooting & Repair
Breakers that trip for no obvious reason, circuits that go dead, lights that flicker when the dryer starts, outlets that no longer hold a plug, GFCIs that won't reset, a faint burning smell you can't locate. These are the calls where experience shows. We trace a fault to its real source instead of swapping parts and billing for guesses, which is why our repairs hold and why we get called in behind other contractors who couldn't find the problem. In older Sonoma County homes the cause is often a failing backstab connection, a corroded neutral, a rodent-damaged run in a crawlspace, or a decades-old junction box buried behind drywall.
Custom Homes & New Construction
Full electrical for ground-up residential builds, major remodels, and additions throughout Sonoma, Marin, and Napa County — load calculations and plan review, service and meter setup, rough-in, trim, and final inspection. We work with general contractors, designers, and owner-builders, and we're comfortable on high-end custom projects near Sonoma State University where the lighting design, low-voltage layout, and smart controls all have to be coordinated before a single wire goes in. Getting the details right at rough-in is what keeps a home safe and functional for the next forty years — and it's far cheaper than fixing it after the drywall is up.
Commercial Electrical & Tenant Improvement
Service upgrades, panel and subpanel work, dedicated circuits for equipment, lighting retrofits, EV charging for employee and customer parking, and full tenant-improvement electrical for offices, retail, restaurants, and light industrial space along Redwood Drive and beyond. We understand a commercial job runs on someone else's schedule, so we work around business hours when the scope requires it. From a single dedicated circuit to a complete build-out, you get one licensed contractor coordinating permits, PG&E, and inspection — with clear pricing and a clean, code-compliant result.