Electrician Near Adobe, Petaluma, CA
Panels, EV Chargers, Lighting and Backup Power
Bright Right Electric is a family-owned, licensed electrical contractor (CSLB #1156335) serving the area around Adobe in Petaluma. Straight answers and a written number before we start, with no up-sell.
What to know before you call:
- Independent electrician: not affiliated with or endorsed by Adobe.
- A written scope and a firm price before we start.
★★★★★
5.0 · 27 Google reviews
20+ years
in the trade
CSLB #1156335
licensed · bonded · insured
Sonoma County
owned & operated
Electrician Near Adobe, Petaluma, CA
Bright Right Electric near Adobe
- Licensed California C-10 contractor, CSLB #1156335
- Family-owned, with 20+ years in the trade
- Written scope and firm price before any job starts
- Permits pulled, inspections and utility coordination handled
Electrical services
Electrical Work near Adobe
If you need an electrician near Adobe, you get a written scope and a firm price before we start, in plain language, from the licensed contractor who will actually do the work. Bright Right Electric is a family-owned crew. When you call, you reach the people who do the work and who are accountable for how it turns out, not an answering service. If something is genuinely unsafe, we say so directly, and if it can wait, we tell you that too.
This page is for homes and businesses near Adobe. Bright Right Electric is an independent electrician and is not affiliated with, sponsored by or endorsed by Adobe.
EV Charger Installation near Adobe
Once the panel is sorted out, charging at home comes down to a few clear decisions.
An EV charger circuit is the electrical backbone underneath every home charger. Get the sizing right and the charger just works; get it wrong and you end up with a tripped breaker, a hot wire or a charger that quietly throttles itself down. We check capacity and open breaker space, run the wire, install and label the correctly rated breaker, and test for proper voltage, grounding and breaker operation. We also tell you honestly if a smaller fix, such as a subpanel instead of a full upgrade, could work.
Generators, Solar and Backup Power near Adobe
When the power goes out, the right backup plan depends on what you need to keep running and for how long.
A portable generator you already own can be connected the right way. We discuss its wattage, your panel and how you plan to use it, then install the inlet box and test the connection. A manual transfer switch costs more but offers cleaner circuit separation for a dedicated set of essential loads.
Lighting Installation near Adobe
Lighting is the upgrade where the difference shows right away, indoors and out.
From recessed lights and chandeliers to landscape lighting and smart controls, lighting work is real electrical work. We plan the layout, wire the circuits and mount the fixtures, and we explain cost, fixture counts and timeline honestly before you sign anything. It is often an affordable way to make a dated room feel finished.
Remodels, Rewiring and New Construction near Adobe
Remodels, rewiring and new builds all start with a plan for the circuits, the panel and the inspections.
Whole home rewiring replaces most or all of a home's branch wiring, commonly knob-and-tube, aluminum or cloth-insulated wiring, with modern, properly grounded copper wiring. We start with a walkthrough and an honest assessment, explaining what we find plainly, real risk where it exists and not blanket fear. You receive a price in writing for a full rewire or a phased approach, the permit is filed before work begins, and we work room by room, fishing new wire through existing cavities where possible, so most of the house stays livable.
Remodel electrical work happens in stages. Rough-in wiring goes in while the walls are open and is inspected before drywall goes up, and finish electrical, the outlets, switches, fixtures and panels, follows after drywall and paint. We work directly with your contractor and sync the timeline with other trades. If we find aluminum wiring, knob-and-tube or an undersized panel once the walls are open, we explain it and the cost before doing anything.
Getting Started near Adobe
Getting started is simple. Every Bright Right estimate comes with a defined scope and a real price before any work begins, in writing and explained in plain language. Call (707) 791-5552 and describe the job, the question or what you want a second opinion on, and we will tell you what to expect before we arrive.
Commercial and tenant work
We plan around your operating hours and coordinate with your general contractor so electrical work doesn't become the reason an opening slips.
New circuits and 240-volt outlets
Dedicated circuits provide reliable power to high-demand appliances and equipment while reducing the risk of overloads.
Standby generators and backup power
Standby generators, critical-loads panels, portable-generator inlets, automatic transfer switches and whole-house surge protection, matched to the system that actually fits your property.
Areas
More Petaluma Areas We Serve
Start with our main page for the city, or pick another area nearby.
Map and directions
Adobe on the Map
The map shows the area. Use the button to open it in Google Maps, or get directions from our shop.
Open in Google MapsMap data from OpenStreetMap contributors
From our shop
Our shop is at 1150 Holly Ave in Rohnert Park. Open directions from our shop in Google Maps for a current route.
Call for a free estimate
Call (707) 791-5552 and describe the job, the question or what you want a second opinion on.
What we need from you
Tell us what is going on, when it happens and how often, so we know what to expect before we arrive.
Everything we do
All Electrical Services near Adobe
Everything below is available near Adobe, for homes and for businesses.
Commercial electrical: commercial versions of the services above, including tenant improvements, lighting and code corrections.

Electrician Near Adobe, Petaluma, CA
Popular near Adobe
“For my first experience I needed some troubleshooting done on an old panel, and they came highly recommended. They were quick to arrive, professional, and incredibly knowledgeable.”
Doug McGillvrey, from our Google reviews
Questions
Frequently Asked Questions
Can you work with my general contractor?
Yes. For remodels and new construction we work directly with your contractor, sync the timeline with other trades, and have every circuit permitted and inspected at both the rough-in and finish stages.
Do you pre-wire for future equipment?
Yes. For new construction and remodels, we tell you what to pre-wire now, such as an EV charger, solar or a generator, while the walls are open, since retrofitting later costs far more.
What is an electrical code correction?
It is work that brings specific parts of your electrical system up to current code, fixing the particular items flagged rather than rewiring the whole house. It is most often triggered by a home sale, an inspection report or an insurance requirement.
Do you handle solar and batteries?
Yes. We handle new photovoltaic installation, battery storage, system additions and remove-and-replace work, plus service on existing arrays and straightforward evaluations of inherited systems.
Why are my lights flickering?
Flickering can have different causes depending on when and where it occurs. We troubleshoot the circuit and identify the actual source instead of guessing at the repair.
Get in touch
Ready to Get Started?
Call (707) 791-5552 any time, day or night, or fill out the quote form below and we'll get back to you.
Phone
(707) 791-5552
(tap to call)
Address
1150 Holly Ave, Rohnert Park, CA 94928
Hours
7am - 5pm & 24 hour emergency services available.
15 ─────── Full service detail
Electrical Panel Upgrades in Rohnert Park
Replacing an undersized or obsolete panel is the most common job we perform in Rohnert Park, and it's the one that unlocks everything else. If your home still runs original 100-amp service, a Federal Pacific Stab-Lok, or a Zinsco panel, you're working with equipment engineered for a much smaller electrical load — and, in the case of those two brands, with a documented history of breakers that fail to trip. Upgrading to 200-amp service makes EV charging, battery backup, heat pumps, and modern appliance loads possible without constantly tripping breakers. We size the new service to what your household actually needs, pull the permit, coordinate the PG&E disconnect and reconnect, and meet the inspector for final sign-off.
EV Charger Installation in Sonoma County
Bright Right installs Level 2 home charging sized to your vehicle and, just as importantly, to your panel's actual available capacity. We run the dedicated 240-volt circuit, mount and commission the charger, and handle the permit — installing Tesla Wall Connectors, universal J1772 and NACS units, and hardwired or plug-in setups across Rohnert Park, Petaluma, and Santa Rosa. The detail most homeowners don't hear until it's too late is that many Sonoma County panels can't support a Level 2 charger without a service upgrade first, so we run a load calculation before you buy equipment, not after. We can also pre-wire a second circuit if a second EV is anywhere in your future.
Standby Generators & Backup Power
Public safety power shutoffs are a fact of life in Sonoma County, and so are winter storms that take lines down in the hills. We install whole-house standby generators with automatic transfer switches that pick up the house within seconds of an outage, wire inlets and manual transfer switches for portable generators, and add whole-house surge protection so your equipment isn't damaged when the utility comes back online. We'll also tell you honestly which tier makes sense — not every home in Cotati or Penngrove needs a whole-house unit when a critical-loads panel that keeps the refrigerator, well pump, internet, and a few circuits alive costs a fraction as much.
Solar & Battery Systems
We handle new photovoltaic installation, battery storage, system additions, and remove-and-replace work when a roof needs attention or a system has failed — plus service on existing arrays that aren't producing what they should. If you inherited a solar system with the house and nobody can tell you how it's wired or whether it's still under warranty, we can assess it and give you a clear picture. Battery storage in particular has changed the math for Sonoma County homeowners: between shifting utility rate structures under NEM 3.0 and the frequency of outages, a battery paired with existing solar is often a better investment than adding more panels.
Interior & Exterior Lighting
Recessed and can lighting, full LED retrofits, under-cabinet lighting, dimmer and smart-switch installation, fixture and chandelier hanging, landscape lighting, and security and motion-sensor lighting for homes across Rohnert Park and the University District. On the commercial side we handle lighting retrofits for offices, retail spaces, and warehouses along the Commerce Boulevard corridor, including the fixture and control changes that come with California Title 24 compliance. Lighting is one of the few electrical upgrades where the difference is immediately visible, and it's frequently the cheapest way to make a dated room feel finished.
Electrical Troubleshooting & Repair
Breakers that trip for no obvious reason, circuits that go dead, lights that flicker when the dryer starts, outlets that no longer hold a plug, GFCIs that won't reset, a faint burning smell you can't locate. These are the calls where experience shows. We trace a fault to its real source instead of swapping parts and billing for guesses, which is why our repairs hold and why we get called in behind other contractors who couldn't find the problem. In older Sonoma County homes the cause is often a failing backstab connection, a corroded neutral, a rodent-damaged run in a crawlspace, or a decades-old junction box buried behind drywall.
Custom Homes & New Construction
Full electrical for ground-up residential builds, major remodels, and additions throughout Sonoma, Marin, and Napa County — load calculations and plan review, service and meter setup, rough-in, trim, and final inspection. We work with general contractors, designers, and owner-builders, and we're comfortable on high-end custom projects near Sonoma State University where the lighting design, low-voltage layout, and smart controls all have to be coordinated before a single wire goes in. Getting the details right at rough-in is what keeps a home safe and functional for the next forty years — and it's far cheaper than fixing it after the drywall is up.
Commercial Electrical & Tenant Improvement
Service upgrades, panel and subpanel work, dedicated circuits for equipment, lighting retrofits, EV charging for employee and customer parking, and full tenant-improvement electrical for offices, retail, restaurants, and light industrial space along Redwood Drive and beyond. We understand a commercial job runs on someone else's schedule, so we work around business hours when the scope requires it. From a single dedicated circuit to a complete build-out, you get one licensed contractor coordinating permits, PG&E, and inspection — with clear pricing and a clean, code-compliant result.
