Energy Recovery Ventilation (ERV/HRV) Electrical Hookups in Rohnert Park, CA
We wire the dedicated circuit, disconnect switch, and controls for your ERV or HRV system and coordinate directly with your HVAC contractor for the mechanical side — permitted correctly, priced honestly.
What to know before you call:
- We're upfront about scope: we handle the electrical connection — dedicated circuit, disconnect, and control wiring — not the ductwork or unit installation, which is HVAC contractor work.
- Rohnert Park sits in California Climate Zone 2, where the 2025 Title 24 code cycle made balanced ERV/HRV ventilation a prescriptive requirement for qualifying new construction and major remodels, effective January 1, 2026.
- Licensed, family-owned, and available 24/7 — we coordinate directly with your HVAC contractor so the electrical isn't the thing holding up your project.
★★★★★
5.0 · 27 Google reviews
20+ years
in the trade
CSLB #1156335
licensed · bonded · insured
Sonoma County
owned & operated
Energy Recovery Ventilation (ERV/HRV) Electrical Hookups
Why Rohnert Park Chooses Bright Right Electric
- Licensed under CSLB #1156335 as an electrical contractor — we tell you plainly what falls under that license and what doesn't.
- A family-owned crew that coordinates directly with your HVAC contractor instead of leaving you to manage the handoff.
- Straightforward pricing you hear before we start, not after.
Energy Recovery Ventilation (ERV/HRV) Electrical Hookups
What Is Energy Recovery Ventilation?
Energy Recovery Ventilation (ERV) and its close relative Heat Recovery Ventilation (HRV) are mechanical systems that exchange stale indoor air with fresh outdoor air while recovering most of the heat — and, with an ERV, the moisture too — that would otherwise be lost. They're increasingly common in tightly built modern homes, which don't leak enough air on their own to ventilate properly. Here's the part worth knowing upfront: selecting the unit, designing the ductwork, and installing the mechanical system is HVAC contractor work, typically requiring a C-20 license in California. Bright Right Electric's role is the electrical connection — the dedicated circuit, the disconnect switch, and the control wiring the unit needs to run — and we coordinate directly with your HVAC contractor for everything else. For other electrical work tied to your project, see our electrical installation page.
Energy Recovery Ventilation (ERV/HRV) Electrical Hookups
Do You Need One? Title 24 and California Climate Zone 2
Rohnert Park sits in California Climate Zone 2. As of the 2025 Title 24 code cycle, effective January 1, 2026, balanced ventilation with an ERV or HRV became a prescriptive requirement in Climate Zone 2 for qualifying new construction and major remodels. If you're building new or planning a remodel that touches a significant part of your home's envelope, it's worth confirming with your Title 24 consultant or HVAC contractor whether this requirement applies to your project.
Energy Recovery Ventilation (ERV/HRV) Electrical Hookups
Our Process
Since this is a multi-trade job, our process is built around coordinating cleanly with whoever's handling the mechanical side.
01
Confirm the electrical specs
We review the manufacturer's installation manual or your HVAC contractor's specs to confirm the circuit, disconnect, and control requirements for your specific unit.
02
Panel capacity check
We confirm your panel has room for the new circuit before quoting.
03
Written estimate
You get the scope and price for the electrical portion in writing before any work begins.
04
Permit filed
We file the permit for the electrical portion of the work.
05
Circuit, disconnect, and control wiring installed
We install the dedicated circuit, an accessible disconnect switch, and any control or interlock wiring the unit needs.
06
Coordination and testing
We time our work around your HVAC contractor's installation schedule and test our portion before calling it done.
Energy Recovery Ventilation (ERV/HRV) Electrical Hookups
What Does the Electrical Hookup Cost?
The electrical connection for an ERV or HRV system — a dedicated circuit, a disconnect switch, and control wiring — is priced similarly to any other dedicated circuit installation, commonly $150 to $900 depending on the distance from your panel and how the controls need to be wired. That's separate from the full HVAC-scope cost of the system itself (the unit and ductwork), which nationally runs $1,500 to $4,500 and is quoted by your HVAC contractor.
Those are honest general ranges for the electrical portion, not a locked-in Bright Right Electric quote — the fastest way to get an exact number is a short walkthrough or a look at your HVAC contractor's spec sheet. Call (707) 791-5552 or request a quote below and we'll tell you plainly what it'll cost.
Energy Recovery Ventilation (ERV/HRV) Electrical Hookups
ERV vs. HRV — What's the Difference?
An ERV transfers both heat and moisture between the outgoing and incoming air streams, which makes it a common recommendation for Sonoma County's mix of damp winters and dry summers. An HRV transfers heat only. Both types recover roughly 60-90% of the energy that would otherwise be lost to ventilation. Which one fits your specific home is a decision typically made with your HVAC contractor or Title 24 consultant based on your project's needs — we'll wire whichever system is specified.
Energy Recovery Ventilation (ERV/HRV) Electrical Hookups
What's Included
Here's what falls under Bright Right's electrical scope for an ERV/HRV project.
Dedicated Circuit & Receptacle
A properly sized circuit and receptacle for the unit, per manufacturer specifications.
Disconnect Switch Installation
An accessible disconnect switch so the unit can be safely serviced.
Control & Interlock Wiring
Wall control wiring and, where applicable, interlock wiring to sync the unit with an air handler.
Panel Capacity Check
Confirming your panel has room for the new circuit before any work is quoted.
Permit & Inspection
We pull and close out the permit for the electrical portion of the work.
Coordinating With Your HVAC Contractor
We time our electrical work around your HVAC contractor's installation schedule so neither trade holds up the other.
Energy Recovery Ventilation (ERV/HRV) Electrical Hookups
Why Choose Bright Right Electric
Honest about scope.
We tell you plainly what's electrical work and what isn't, instead of implying we handle the whole system.
Panel capacity checked first.
You'll know before we start whether your panel has room for the new circuit.
Permit-first, every time.
We file and close out the permit for our portion of the work as standard.
24/7 means 24/7.
Call any time and you'll reach Dustin or Rick directly, not a dispatcher relaying a message.
08 ─────── Reviews
What Rohnert Park Customers Are Saying
"This is the most professional company I have ever worked with. I am a difficult person and hard to please (I have really high standards (as a retired science teacher) and I am skeptical of workmen and I'm a perfectionist!). Bright Right is currently working on the 3rd job I have hired them for – everything has gone smoothly, no stress at all!!! They are so friendly and so courteous. Rick and Dustin are an effective team with their two unique personalities – both very upbeat, serious, and kind. They explain everything in detail and answer all my questions (I am hyper-concerned about my property), and they are basically experienced, conscientious electricians you can trust."
— Nora Parker · Google Review
"I recently hired Dustin for some electrical work at my home, and I couldn't be happier with the results. He installed a high-quality bathroom fan, finished installing several outlets around the house, and completed a new electrical panel installation. From start to finish, Dustin was professional, knowledgeable, and clearly takes pride in doing the job right. The new panel installation was the bigger job, and Dustin handled it with real expertise. Everything was organized, labeled, and done to a very high standard, which gave me a lot of confidence in the safety and quality of the work."
— Google Review
"Bright Right did the electrical for our kitchen remodel and we couldn't be happier, we have since then added an EV with them and they were as good as the first time. Highly recommend!"
— Joey Evans · Google Review
"Shout out to Dustin Fildes, the electrician they sent to do the work at my house. You can tell he takes pride in his work. He's a very professional and very friendly. Individual would absolutely recommend Bright Right Electric and specifically Dustin to all my family and friends. Thank you Bright Right"
— Robert Horner, Google Review
Google Business Profile
5.0
Across 27 Google reviews
Energy Recovery Ventilation (ERV/HRV) Electrical Hookups
Serving Rohnert Park and the Greater North Bay
Bright Right Electric provides commercial and tenant improvement electrical throughout Rohnert Park — offices, retail, and restaurants along the Commerce Boulevard and Redwood Drive corridors, and businesses near Sonoma State University and the University District — and out to Cotati, Penngrove, Petaluma, Santa Rosa, Sebastopol, Windsor, Healdsburg, Sonoma, and Cloverdale. Coverage extends into Marin County (San Rafael, Novato, Mill Valley, Sausalito, Larkspur, Corte Madera, San Anselmo, Fairfax, and Tiburon) and Napa County, including wineries, tasting rooms, and hospitality projects. If your property isn't listed, call anyway — the answer is usually yes.
Questions
Frequently Asked Questions
Does my new home or remodel in Rohnert Park need an ERV or HRV?
As of January 1, 2026, California's updated Title 24 code makes balanced ventilation with an ERV or HRV a prescriptive requirement in Climate Zone 2, which includes Rohnert Park, for qualifying new construction and major remodels. Confirm with your Title 24 consultant or HVAC contractor whether your project falls into that category.
What electrical work does an ERV or HRV system need?
A dedicated circuit or receptacle, an accessible disconnect switch, and control wiring for the wall control or air handler interlock. Bright Right Electric handles this portion of the installation.
How much does the electrical hookup for an ERV cost?
The electrical portion typically runs $150 to $900, similar to any dedicated circuit installation, depending on distance from the panel and how the controls are wired. Call (707) 791-5552 for an exact number.
Does an electrician install the whole ERV system?
No. Selecting the unit, designing the ductwork, and balancing airflow is HVAC contractor work requiring a C-20 license. Bright Right Electric, licensed as an electrical contractor (CSLB #1156335), handles the required electrical connection and coordinates with your HVAC contractor for the rest.
What's the difference between an ERV and an HRV?
An ERV transfers both heat and moisture between air streams, which suits Sonoma County's mix of damp winters and dry summers well. An HRV transfers heat only. Both recover roughly 60-90% of the energy otherwise lost to ventilation.
Do I need a permit for ERV electrical work in California?
In most cases, yes — a new dedicated circuit requires a permit. Bright Right Electric pulls and closes out the required permit for the electrical portion as standard.
Can an ERV or HRV help with wildfire smoke?
Yes, when combined with appropriate filtration such as HEPA or activated carbon, a balanced ventilation system can help reduce particulates and smoke odor during smoke events. Your HVAC contractor can advise on filtration options for your specific system.
Does an ERV help prevent mold?
Yes. By managing indoor humidity year-round, an ERV helps prevent the excess moisture that leads to mold, particularly in tightly sealed modern construction.
What is HERS verification?
Third-party field testing, performed by a certified HERS rater, required to confirm a ventilation system's performance meets Title 24 requirements before final inspection. Your HVAC contractor or Title 24 consultant typically coordinates this.
What California climate zone is Rohnert Park in?
Rohnert Park is in California Climate Zone 2, one of the zones where the 2025 Title 24 code cycle made balanced ERV/HRV ventilation a prescriptive requirement for qualifying projects
Get in touch
Ready to Get Started?
Call (707) 791-5552 any time, day or night, or fill out the quote form below and we'll get back to you.
Phone
(707) 791-5552
(tap to call)
Address
1150 Holly Ave, Rohnert Park, CA 94928
Hours
7am - 5pm & 24 hour emergency services available.
15 ─────── Full service detail
Electrical Panel Upgrades in Rohnert Park
Replacing an undersized or obsolete panel is the most common job we perform in Rohnert Park, and it's the one that unlocks everything else. If your home still runs original 100-amp service, a Federal Pacific Stab-Lok, or a Zinsco panel, you're working with equipment engineered for a much smaller electrical load — and, in the case of those two brands, with a documented history of breakers that fail to trip. Upgrading to 200-amp service makes EV charging, battery backup, heat pumps, and modern appliance loads possible without constantly tripping breakers. We size the new service to what your household actually needs, pull the permit, coordinate the PG&E disconnect and reconnect, and meet the inspector for final sign-off.
EV Charger Installation in Sonoma County
Bright Right installs Level 2 home charging sized to your vehicle and, just as importantly, to your panel's actual available capacity. We run the dedicated 240-volt circuit, mount and commission the charger, and handle the permit — installing Tesla Wall Connectors, universal J1772 and NACS units, and hardwired or plug-in setups across Rohnert Park, Petaluma, and Santa Rosa. The detail most homeowners don't hear until it's too late is that many Sonoma County panels can't support a Level 2 charger without a service upgrade first, so we run a load calculation before you buy equipment, not after. We can also pre-wire a second circuit if a second EV is anywhere in your future.
Standby Generators & Backup Power
Public safety power shutoffs are a fact of life in Sonoma County, and so are winter storms that take lines down in the hills. We install whole-house standby generators with automatic transfer switches that pick up the house within seconds of an outage, wire inlets and manual transfer switches for portable generators, and add whole-house surge protection so your equipment isn't damaged when the utility comes back online. We'll also tell you honestly which tier makes sense — not every home in Cotati or Penngrove needs a whole-house unit when a critical-loads panel that keeps the refrigerator, well pump, internet, and a few circuits alive costs a fraction as much.
Solar & Battery Systems
We handle new photovoltaic installation, battery storage, system additions, and remove-and-replace work when a roof needs attention or a system has failed — plus service on existing arrays that aren't producing what they should. If you inherited a solar system with the house and nobody can tell you how it's wired or whether it's still under warranty, we can assess it and give you a clear picture. Battery storage in particular has changed the math for Sonoma County homeowners: between shifting utility rate structures under NEM 3.0 and the frequency of outages, a battery paired with existing solar is often a better investment than adding more panels.
Interior & Exterior Lighting
Recessed and can lighting, full LED retrofits, under-cabinet lighting, dimmer and smart-switch installation, fixture and chandelier hanging, landscape lighting, and security and motion-sensor lighting for homes across Rohnert Park and the University District. On the commercial side we handle lighting retrofits for offices, retail spaces, and warehouses along the Commerce Boulevard corridor, including the fixture and control changes that come with California Title 24 compliance. Lighting is one of the few electrical upgrades where the difference is immediately visible, and it's frequently the cheapest way to make a dated room feel finished.
Electrical Troubleshooting & Repair
Breakers that trip for no obvious reason, circuits that go dead, lights that flicker when the dryer starts, outlets that no longer hold a plug, GFCIs that won't reset, a faint burning smell you can't locate. These are the calls where experience shows. We trace a fault to its real source instead of swapping parts and billing for guesses, which is why our repairs hold and why we get called in behind other contractors who couldn't find the problem. In older Sonoma County homes the cause is often a failing backstab connection, a corroded neutral, a rodent-damaged run in a crawlspace, or a decades-old junction box buried behind drywall.
Custom Homes & New Construction
Full electrical for ground-up residential builds, major remodels, and additions throughout Sonoma, Marin, and Napa County — load calculations and plan review, service and meter setup, rough-in, trim, and final inspection. We work with general contractors, designers, and owner-builders, and we're comfortable on high-end custom projects near Sonoma State University where the lighting design, low-voltage layout, and smart controls all have to be coordinated before a single wire goes in. Getting the details right at rough-in is what keeps a home safe and functional for the next forty years — and it's far cheaper than fixing it after the drywall is up.
Commercial Electrical & Tenant Improvement
Service upgrades, panel and subpanel work, dedicated circuits for equipment, lighting retrofits, EV charging for employee and customer parking, and full tenant-improvement electrical for offices, retail, restaurants, and light industrial space along Redwood Drive and beyond. We understand a commercial job runs on someone else's schedule, so we work around business hours when the scope requires it. From a single dedicated circuit to a complete build-out, you get one licensed contractor coordinating permits, PG&E, and inspection — with clear pricing and a clean, code-compliant result.